STC-1000 Digital Temperature Controller Centigrade Thermostat AC 220V Heating Cooling Controller with 3ft Long NTC Sensor Probe

Control temperature by setting the temperature set value and the difference value
Temperature calibration;
Refrigerating control output delay protection;
Alarm when temperature exceeds temperature limit or when sensor
Power: 220v
Output: 220v 10A
Size: 8.5 x 7.5 x 3.5 CM
Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical Settings, is your side temperature control housekeeper.
Package including: 1 Pack of STC-1000 intelligent thermostat module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling.
STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by setting the temperature setting value and the difference value; Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start.
High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) It is precise and reliable with good long-term stability. Refrigerating control output delay protection. Alarm when temperature exceeds temperature limit or when sensor error.
A wide range of applications: temperature controller is equipped with over 36’’ inch waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile tank. Widely used in HVAC, dehumidifier, test and test equipment, automobile, automatic control, weather station, humidity regulator and other related temperature detection and control.
Technical Parameters
Temperature measuring range:-50~99°C;
Resolution:0.1°C;
Accuracy:+/- 1°C (-50~70°C);
Sensor error delay:1 minute
Power supply: 220VAC+/- 10%,50/60Hz;
Power consumption: less than equal 3W;
Sensor: NTC sensor (1PC);
Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
Mbient temperature:0~60°C;
Storage temperature:-30~75°C;
Relative humidity:20%~85% (No condensate).
Material: ABSPackage included:
1 x Mini Digital Temperature Controller Thermostat
1 x Temperature sensor probe with 2M cable
Heating and cooling function switchable, support °C display, automatic over temperature alarm.
Temperature Calibration，Refrigerating control output delay protection function are supported.
Control temperature by setting the temperature set value and the different value.
Temperature Measuring Range: -50~99°C; Resolution: 0.1°C; Accuracy: ±1℃ (-50~70°C); with 3ft sensor probe.
Can be Used for Domestic Freezer, Water Tanks, Refrigerator, Aquarium, Home brewing Beer, Chicken Incubator, etc, also suitable for Laboratories use and other temperature-controlled systems.
Key operational instructions
1 .The way to check parameter:
Under normal working status, press “up” key it displays temperature setting value; press “down” key it displays the difference value.
2. The way to set parameter:
Under controller normal working status, press “s”key for 3s or more to enter parameter modifying mode, and the “Set” indicator light on, screen displays the first menu code “F1”.
Press “up”key or “down” key to adjust up and down and display the menu iem and the code of the menu item.Press “s” key to display the parameter value of the current menu. Press both “s”key and hold “up”key or “down” key simultaneously to choose and adjust the parameter value of the current menu value promptly. After finishing the setting, press and release the “(I)” key instantly to save the parameter modified value and return to display the normal temperature value. If no key operation within 10 seconds, system won’t save modified parameter, screen back to display normal temperature.
3. Restore system data:
When electrified, system will check itself, screen will display “Er” if error exit, please press any key at this time, and it restores default value and enter into normal working mode, it is advised to reset the parameter value under such conditions.